Robe Colorstrobe

Robe Colorstrobe

SOURCE

Light Source Type: 120x 15W RGBW multichips
LED Life Expectancy: Minimum 40.000 hours
Typical Lumen Maintenance: 70% @ 40.000 hours
NO POWER PASS THROUGH

OPTICAL SYSTEM AND EFFECTS

High efficient component optics
Beam Angle: 35° (at 1/2 beam), 63° (at 1/10 beam)
Individual control: 1, 4 or 12 zones
Strobe: 13-860 ms
Strobe rate: 0.3-30 Hz
Colour Mixing System: RGBW or CMY colour mixing, CTO
Virtual Colour Wheel: with 237 colours including whites (2.700 K, 3.200 K, 4.200 K, 5.600 K and 8.000 K)
Tungsten Lamp Effects at Whites: 2.700 K and 3.200 K
Colour changer effect: Continuous full power RGBW operation with high resolution dimmer
High Resolution Dimmer: 0-100%
Strobe effects: Ramp up, ramp down, ramp up-down, random flash, single flash

CONTROL AND PROGRAMMING

Setting & Addressing: Robe Navigation System 2 (RNS2)
Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2, sACN
Optional wireless version available: CRMX™ technology from Lumen Radio
Control Channels: 9, 14, 18, 28, 84
Protocol Modes: 5
Programs: 3 editable programs up to 88 steps
Stand-alone operation
Display: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC Ethernet Port: Art-Net protocol, ready for ACN
Data in/out: Locking 3-pin & 5-pin XLR
Built in analyser for easy fault finding

THERMAL SPECIFICATION

Maximum Ambient Temperature: 45° C (113° F)
Maximum Housing Temperature: 90 °C (194 °F)

ELECTRICAL SPECIFICATION

Electronic auto-ranging
Input Voltage Range: 100-240 V, 50/60 Hz
Power Consumption: 1.300W
Power Connector: Neutrik PowerCon

MECHANICAL SPECIFICATION

Height (U-holder vertically): 350 mm (13.8″)
Width: 315 mm (17,7″)
Depth: 300 mm (11,8″)
Weight: 16.8 kg (37 lbs)
Ingress protection: IP 22

Available for rental.

User Manual